K2 MEGA MIRROR - rearview mirror glue 0.6 l

With the ready-to-use rear-view mirror adhesive, the rear-view mirror attaches quickly and strongly to the interior windshield.

The product also works in metal-to-metal, glass-to-glass, ceramic, etc. connections. After 5 minutes, the glue reaches 60% of its strength at a pressure of 206 bar.

Usage

• The glue must not be applied to a cold window, the ambient temperature must be approx. 20 °C.
• Mark the old mirror location outside the window and clean the surfaces to be glued with a razor blade.
• Remove the cardboard sleeve and turn the primer vial so that the inner cylinder clicks into place. The primer flows into the felt-tip pen. Use a pencil to apply a thin layer of primer on the surface of the window and let it dry for 1-2 minutes.
• Apply a drop or a small amount of glue to the already primed surface. The glue works faster when the mirror holder is attached to the glass with one press.
• Attach the holder to the glass in the correct position and hold for approx. 30 seconds without moving, otherwise the adhesive effect will not be achieved.
• Wait another 10 minutes and connect the mirror to the bracket.

Warnings
Danger, glue skin and eyelids together in seconds. Keep out of the reach of children. Irritating to eyes, respiratory system and skin. Do not breathe vapor. Avoid contact with eyes and skin. If the substance gets into the eyes, rinse immediately with plenty of water and seek medical attention.